Specification :

- Constant current 100A Max 125A<10s
- Li-Poly 2-7 cells; Ni-MH 6-27 cells
- Low resistant 0.0010ohms
- Dynamic Braking
- No BEC

- Auto shut down when loss signal
- Slow down at 3.0V per cell Li-Poly, Cut off 2.9V per cell Lipo 0.8V Nim
- User programming options
- Battery Setting
-Throttle range
- Brake Setting
- Direction and Cutt off Type
- Timing mode setting : 1/7/15/30
- PMW Setting : 8K/16K

Important Note :
This ESC is OPTO, without BEC supplying power to your receiver, you need extra power source for your receiver.
You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver.
If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.