Futaba 6K 6-Channel 2.4GHz Computer Radio System

Brand: Futaba

Product added on: Thursday: July 28, 2016





Rp 3.341.250

An incredible value in 6-channel control

You'll be hard pressed to find another 6-channel system with as many functions as the 6K at a comparable price. Telemetry sensors monitor critical flight data, including temperature, RPM, altitude, receiver battery voltage, external voltage and variometer. It's compatible with S.Bus and S.Bus2 servos, and setting functions can be programmed through the transmitter. Controls are positioned to be within easy reach, and the menu is a breeze to navigate. Throw in other features such as 30 model memory, a 128x64 DOT backlit LCD screen and updateable software, and it's easy to see how the 6K is a lot of radio for the money.


R3006SB


spacer The R3006SB receiver can use S.Bus as the main link/communication to the servos or a combination of S.Bus and the conventional outputs together. It features 6 standard PWM outputs in addition to S.Bus and S.Bus-2 outputs.Features bi-directional communication with a T-FHSS Air Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port with an impressive array of telemetry sensors may be utilized.


The versatile 6K meets the control needs of a wide range of R/C pilots!

Program navigation is easy and intuitive with the jog dial, +/- pads and end pad.

spacer The antenna is inside the transmitter case for safety and handling convenience.
spacer This variable rate dial can be programmed to perform different functions; a speaker allows for telemetry voice feedback and audio alarms.

switches

Four assignable switches (three 3-position and one 2-position) offer maximum flexibility.
spacer

earplug/trainer/S.Bus ports

The earplug/trainer/S.Bus ports are all conveniently located.
spacer





System features
  • S-FHSS/T-FHSS selectable
  • Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
  • Built-in antenna
  • S.Bus/S.Bus2 servo setting functions programmable through the transmitter
  • Preset vibration alarms
  • 30 model memory
  • 8-character model/user naming
  • Programmable mixes for airplanes, helicopters, gliders and multi-rotors
  • Digital trims with variable step settings
  • Adjustable stick length and tension
  • Changeable switch/VR position and AUX channel function
  • Throttle position warning
  • Backlit 128x64 DOT LCD screen with adjustable display contrast
  • Software updateable through the CIU-2
  • Screen Lock
  • Earphone/S.Bus/Trainer jacks
  • Assignable switches (three 3-position, one 2-position)
  • Range Check
  • Program navigation bay with jog dial, +/- pads and end pad
  • Data reset
  • Model copy
  • Selectable model type
  • Fail Safe
  • End Points
  • Trim/Trim Resets/Trim Steps
  • Sub Trim
  • Servo Reversing
  • Parameter functions
  • Servo monitor/Test
  • Wireless model data transfer
  • Timer-System and Model (Up/Down)
  • Trainer system
spacer Airplane Functions
  • Wing Type (5-wing, 2-tail)
  • Throttle Cut
  • Dual Rate/Expo
  • Throttle Curve
  • Idle down
  • Gyro
  • Aileron differential
  • V-Tail
  • Camber
  • Air Brake
  • Elevator-to-Flap mixing
  • Flap-to-Elevator mixing
  • Elevon mixing

Glider Functions

  • Wing Type (5-Wing, 2-Tail)
  • Condition select
  • Dual Rate/Expo
  • Motor switch
  • Gyro
  • Aileron Differential
  • V-tail
  • Butterfly mixing
  • Trim mixing
  • Elevator-to-Camber mixing
  • Camber mixing
  • Aileron-to-Camber mixing
spacer Helicopter Functions
  • Swash type (6)
  • Condition Select
  • Throttle Cut
  • Dual Rate/Expo
  • Trim Offset
  • Delay
  • Gyro mixing
  • Swash AFR
  • Swash mixing
  • Throttle Curve (5-point)
  • Pitch Curve (5-point)
  • Pitch-to-Rudder mixing
  • Throttle Hold
  • Hovering throttle
  • Hovering pitch

Multicopter Functions

  • Flight Mode
  • Center alarm
  • Dual Rate/Expo
  • Throttle Curve
  • Throttle Delay
  • Gyro

Requirements:

  • 4 “AA” cells
  • Servos

Transmitter Specifications:
Type: 2-stick, 6-channel, T-FHSS/S-FHSS selectable
Power Supply: Optional 6V Nimh's or 6.6V Lithium (LiFe) batteries

R3006SB
Receiver Specifications:
R3006SB 2.4GHz T-FHSS S.Bus
Type: Full-range flight receiver
Modes: S-FHSS or T-FHSS
Features: bi-directional communication with a T-FHSS transmitter to utilize an array of telemetry sensors, S.Bus and S.Bus2 ports, along with 6 standard PWM outputs
Voltage Input: 4.8V-7.4V
Dimensions: 1.7 x 0.98 x 0.35 in (43 x 25 x 8.8 mm)
Weight: 0.3 oz (8.5 g)

related products

BRAND

Align
APC
Art-tech
ASP Engines
CMPro
DJI
DLE Engine
FAT SHARK
Feelworld
FrSky
FUN-KEY
Futaba
Gens Ace
Goldwing
Hitec
HOBBYWING
HYPERION
IMMERSION RC
Kontronik
Morgan Fuel
OS Engine
RCTimer
SanDisk
SEAGULL MODELS
Surabaya Hobby
SwellPro
T-Motor
Tahmazo
Tarot
Team Magic
Thunder Tiger
VP POWER MASTER