RCTimer ESC 20A Brushless Motor Speed Controller

Brand: RCTimer

Product added on: Tuesday: May 20, 2014





Rp 198.585

Input voltage:DC 6-16.8V(2-4S Lixx)
BEC:5V  2amp
Running current:20A(Output: Continuous 20A, Burst 25A up to 10 Secs.)
Size:  36mm (L) * 26mm (W) * 7mm (H).
Weight: 22g.
 
Programmable Items:
1. Brake Setting?Enabled / Disabled, default is Disabled
2. Battery Type?Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd)?default is Li-xx.
3. Low Voltage Protection Mode(Cut-Off Mode)? Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                        Input voltage:DC 6-16.8V(2-4S Lixx)
Input voltage:DC 6-16.8V(2-4S Lixx)
BEC:5V  2amp
Running current:20A(Output: Continuous 20A, Burst 25A up to 10 Secs.)
Size:  36mm (L) * 26mm (W) * 7mm (H).
Weight: 22g.
 
Programmable Items:
1. Brake Setting?Enabled / Disabled, default is Disabled
2. Battery Type?Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd)?default is Li-xx.
3. Low Voltage Protection Mode(Cut-Off Mode)? Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                            
4. Low Voltage Protection Threshold(Cut-Off Threshold)?Low / Medium / High, default is Medium.
1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V.
2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V?
5. Startup Mode?Normal /Soft /Super-Soft, default is Normal.
Normal is preferred for fixed-wing aircraft. Soft or Super-soft are preferred for helicopters. The initial acceleration of the Soft and Super-Soft modes are slower in comparison, usually taking 1 second for Soft startup or 2 seconds for Super-Soft startup from initial throttle advance to full throttle. If the throttle is closed (throttle stick moved to bottom) and opened again (throttle stick moved to top) within 3 seconds of the initial startup, the restart-up will be temporarily changed to normal mode to get rid of the chances of a crash caused by slow throttle response. This special design is very suitable for aerobatic flight when quick throttle response is needed.
6. Timing?Low / Medium / High, default is Low.
Usually, low timing value can be used for most motors. We recommend the Low timing value for 2 poles motor and Medium timing value for motors with more than 6 poles to get a high efficiency. For higher speed, High timing value can be chosen.

Package:
1* 20A ESC
1* Manual

related products

BRAND

Align
APC
Art-tech
ASP Engines
CMPro
DJI
DLE Engine
FAT SHARK
Feelworld
FrSky
FUN-KEY
Futaba
Gens Ace
Goldwing
Hitec
HOBBYWING
HYPERION
IMMERSION RC
Kontronik
Morgan Fuel
OS Engine
RCTimer
SanDisk
SEAGULL MODELS
Surabaya Hobby
SwellPro
T-Motor
Tahmazo
Tarot
Team Magic
Thunder Tiger
VP POWER MASTER