Description:
Product Code : [HPP-21 (HPP21) (PN44440)]

Quality product from Hitec.

HPP-21 PC Programmer for Hitec Digital Servos / Servo Tester for All Servo Brands

If you own Hitec Digital servos, you must have one!

This is a new concept of Hitec digital servo programmer working with PC interface. It has all the features that HFP-20 has, except the measurement (RX battery voltage measurement, RX Pulse measurement) function, and needs the PC connection to utilize the PC program.

Why PC interface?
Nowadays, everybody has their own computer and can easily access the internet. We thought it would be great if users can upgrade their servo programmer’s firmware anytime without time & cost consumption.
The PC program for HPP-21 can be downloaded from Hitec website at anytime. Once the user installs the PC program for HPP-21, his computer will detect any upgraded firmware automatically once the computer is connected to the internet. Moreover, the user may perform the servo programming more conveniently & more precisely with the attractively-designed PC program.

HPP-21 will allow the user to easily check any servo brand's performance by using servo test functions and set most of the programmable parameters of all HITEC digital servo types as noted below.

HPP-21 will program the following features of these HITEC digital servos:
-All HS-7XXX G2 servos: Fully-programmable, including OLP (Overload Protection Rate) and High Resolution adjustment function.
-Some HS-5XXX type servos: Fully-programmable Feather and Micro Digital servos, including OLP Rate; excluding High Resolution adjustment function (HS-5055, 5056, 5082, 5085)
-Other HS-5XXX type servos: All features are programable except OLP Rate and High Resolution adjustment functions

NOTE: All HITEC gyro and analog servos are NOT programmable.

Content
HPP-21 Servo Tester / Digital Servo PC Programmer x 1
Manual x 1

Specification
Product Name: HPP-21
Compatible OS: Windows?XP and Windows?VISTA
Connection: USB A to Mini B 5-Pin Cable
Dimension: 47x29x20mm / 1.85x1.14x0.79in
Weight: approx. 10g / 0.35oz

Features
All features are programmable only with Hitec digital servos, but this programmer will also allow users to easily check servos?SPAN lang=EN-US> performance of other brands by using its test function. It can also set most of the programmable parameters of all HITEC digital servo types, and users can save them in their PC. Please refer to the following functions which can be programmed.
- FAIL SAFE, On or Off
- Direction of Rotation
- Resolution Setup (G2 HITEC Servos Only)
- Travel Speed
- Center, End, and FAIL SAFE Point
- Dead Band Width
- OLP Rate (Overload Protection Rate, G2 HITEC Servos Only)
- ?SPAN lang=EN-US>Save and Open?SPAN lang=EN-US> File Options
- Reset Servo to Factory Default Program

Item(s) Required (Sold Separately):
-One [USBAUSBMB] USB A to Mini B 5-Pin Cable, length 720mm/28.3in @SGD3.00
-One 4.8V or 6V Receiver battery*

*HPP-21 requires an external power source in order to test/program a servo. HITEC recommends a standard 4.8V receiver battery, however a 6V pack may be used for servos rated at 6V. WARNING: Be sure to use a fully-charged battery to prevent any data loss or damage during the programming process.

Note: Applicable models will be continuously added in the future. For the most updated information for applicable models and TX & RX programming functions, we strongly recommend you to visit Hitec's programmer site.

Brand: Hitec

Product added on: Saturday, 02 April 2011